General Specifications



Compare the specs, compare the value, Why buy from us:

  • Buy locally - We are an Australian owned and operated company

  • Built Tough for Aussie conditions - Compare the weight and steel thickness of our slashers to the others

  • Fully assembled and ready to Go - Local pickup or local delivery only

  • Delivery Australia wide at very competitive prices  - Crated with minor assembly required 

  • Everything you need to mount onto your tractors 3PL is included 

  • Full 2 year Back to Base Parts and Labour Warranty -  Other only offer parts warranty's (see specifications page for more info)



  • 24 months back to base warranty

  • Excludes general wear and tear, consumables (blades, belts, bushes and bearings etc), misuse or abuse of products or components and use outside of design limits, recommendations or Ground Force terms and conditions


Servicing and parts

  • Ground Force keep a full range of spare parts for all models in stock

  • Grease nipples are on all moving parts not lubricated by oil, including bearings and bushes, grease lines are installed in hard to reach places


Relevant Standards and Guidelines used for construction 

  • Applicable Australian Standards and Guidelines

  • Applicable international Standards and Guidelines


Manuals and Stickers

  • The relevant Safety Stickers are installed, see safety guidelines and examples    

  • Detailed instructions are included with each model

  • Detailed parts book in with schematic drawings are included

  • Waterproof manual and parts book holder are included



  • Powder coat finish with high quality equipment grade enamel top coat, with external surfaces in a Dark Green and Yellow with Gloss

  • Hot dipped galvanised in accordance with AS/NZS 4680 - Hot-dip galvanized (zinc) coatings on fabricated ferrous articles to a minimum 70 μm coating thickness



  • All decks, covers, sides and skids minimum grade of Q235 structural steel (China) or SAE 1022 (Australia). Thickness varies see individual items

  • All pins, gears, and pulleys are to be machined from high grade tool steel (>0.4% Carbon)

  • Blades (also see products and Guidelines) Steel – Grade 1050 (or better), or Silicone manganese or Boron swing with swing back blades, hardness between 35 and 45 Rockwell ‘C’, with balanced shaft and hub


PTO Drive Systems

  • All PTO shafts for implements are included with the implements

  • PTO Shaft Size is to be 1 3/8" x 6 spline, quick release pins at both ends

  • PTO shafts guarded in accordance with AS 1121.4 Agricultural tractor power take-off Part 4 – Guards for power take-off drive shafts – strength and wear tests and acceptance criteria, or equivalent international standards, ISO 5674 and SAE 522.1.

  • Gear box input shaft have plastic safety guard in place

  • Safety chains and clips at both ends to prevent plastic shaft guards from spinning

  • Grease nipples on universal joints both ends, and for shaft inside plastic cover

  • Implements and gear boxes are to be set up for 540 rpm

  • PTO Clutches are to be included on all implements with gearboxes greater than 25hp, and sheer pins on those less than 25hp

  • PTO shafts, universal joints and clutch sizes are to be suitably matched to the Gearbox horse power

  • Safety Stickers are installed on all PTO shafts



  • Stands are included with all implement that can be attached when the implement is not in use. Stands have base plates for dirt or grass surfaces and allow the easy attachment and removal of implement from the tractor